Installing your car stereo
Pontiac
Grand Prix 1990-1993
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the one 9/32-inch hex-head screw from the computer diagnostic plug, then
twist to access the one 9/32-inch screw on the trim panel.
3 Remove the three 9/32-inch screws from the bottom edge of the panel, then remove
it.
4 Open the glove box, then remove the four 9/32-inch screws from the dash trim bezel.
5 Go to "Completing the installation" on page 76.
B
B
71