Sunfire 1995-1999 - Dynex DX-G1113 Guia Del Usuario

74
Pontiac

Sunfire 1995-1999

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Open the glove box, then remove the two exposed Phillips screws on the right edge of
the radio trim bezel.
3 Unclip the bezel, then remove it.
4 Remove the two 7 mm hex-head screws that secure the factory head unit, then
disconnect the wiring.
5 Locate bracket set 9.
6 Go to "Completing the installation" on page 76.
Installing your car stereo