Grand Am 1996-1998 - Dynex DX-G1113 Guia Del Usuario

68 Installing your car stereo
Pontiac

Grand Am 1996-1998

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two Phillips screws above the instrument cluster.
3 Unclip the dash trim bezel, then remove it.
4 Remove the three 7 mm hex-head screws that secure the factory head unit, then
disconnect the wiring.
5 Locate bracket set 9.
6 Go to "Completing the installation" on page 76.