Product Description; Installation; General Preparation - Dovre VINTAGE Serie Instrucciones De Instalacion Y Uso

Product description

1
2
3
4
5
6
1. Mirror
2. Ceramic wood block set
3. Door
4. Leg
5. Glass pane
6. Burner
7. Gas connection
8. Top plate
9. Concentric connection collar top or rear
Stove features
The Vintage GA is a stand-alone closed gas stove.
A closed apparatus does not draw the combustion
air from the room in which the stove is placed but
uses outside air. The stove is connected to a com-
bined air intake/flue gas exhaust system. The
stove can be connected to a C11, C1 or C91-type
chimney system. The stove is fitted with a Muelink
& Grol connection collar for concentric ducts.
Thanks to this concept, the stove is suitable for the
use in crack-free and well-insulated homes.
Delivery of the stove includes a battery-operated
wireless remote control with thermostat.
The appliance comes with electronic ignition.
The stove is delivered with a ceramic true-to-life
wood block set and is equipped with a black mirror
at the rear and the sides for an even livelier flame
effect.
Subject to change because of technical improvements

Installation

9

General preparation

8
Please check the appliance immediately after deliv-
ery for damage during transport or any other dam-
age or defects. The appliance is attached to the
pallet with screws at the bottom.
7
09-20020-184
Remove the detachable parts from the appliance
before you begin its installation.
If you detect transport damage or any other
damage or defects, do not use the appliance
and notify the supplier.
It is easier to move the appliance and to avoid
damage if the removable parts have been
removed.
Note the location of the removable parts, so
that you can re-position the parts in the correct
place later on.
The top plate (1) is loose on the stove and can
simply be lifted off of it; see next figure.
09-20006-004
7