C/24-Hour Or °F/12-Hour Clock Settings - Dovre VINTAGE Serie Instrucciones De Instalacion Y Uso

09-20020-225
The stove must be in standby mode and the pilot must
be lit.
The room temperature is measured and compared to
the temperature programmed. The flame height is auto-
matically adjusted to reach the programmed daytime
temperature.
TEMP – Nighttime reduction temperature
mode
09-20020-245
The appliance must be in standby mode and the pilot
flame must be lit**.
The room temperature is measured and compared to
the nighttime reduction temperature. The flame height
is automatically adjusted to reach the nighttime reduc-
tion temperature.
TIMER – Timer mode
Subject to change because of technical improvements
09-20020-226
The appliance must be in standby mode and the pilot
flame must be lit**.
The timers P1 and P2 (Programme 1, Programme 2)
can each be programmed in such a way that they are
switched ON and OFF at specific points in time. See
the "Programme timer settings" for instructions.
The display shows the temperature pro-
grammed every 30 seconds.
°C/24-hour or °F/12-hour
clock settings
09-20020-227
21