Tank Assembly; Pad Assembly; Maintenance Instructions - Clean Track FloorLine CT Quadro Mini Manual De Instrucciones

HANDLE INCLINATION ADJUSTMENT
Unscrewing ball grip (1) handle and adjust.
Make sure the handle is in a comfortable position before
starting up.
ON/OFF SWITCH: A safety switch that allows the machine
starting up is placed on the engine. Always press this switch
(2) in order to switch the machine on .
NOTE : Do not try to start the machine up if the handle is up
or it is not in a comfortable position for the operator. It could
be dangerous for the machine and the operator.
MACHINE STARTING UP
Switch the machine on using the switch only, never pulling in
or out the plug. Never pull the electric cable to switch or cut the power off. Hold the cab-
le from the head to plug it into the electric socket, do not plug the cable in from the wire.

TANK ASSEMBLY

STEP 1: TANK ASSEMBLY
Fasten water tank on the metal handle (3) before connecting smoo-
thing machine to power socket as pictured.
Fasten tank with screws. Attach the water tube in the nozzle of the
lower part of tank, attach the opposite extremity as indicated.

PAD ASSEMBLY

STEP 2: HOLDING PLATE AND BRUSHES ASSEMBLY
After disconnecting the machine from the power system place recline the machine to
the floor. Assemble the holding plate and brushes with the four
screws supplied.
Any accessory can be inserted underneath the holding plate
using the Velcro system.
BRUSHES and ABRASIVES
a) Black pad for deep cleaning b) White pad for polishing
c) Green pad for maintenance d) PPL brush for maintenance
e) diamond abrasives for marble polishing f) Sand paper for
wood

MAINTENANCE INSTRUCTIONS

WARNING: Unplug from power supply before carrying out any maintenance operation.
25