Clean Track FloorLine CT Quadro Mini Manual De Instrucciones página 7

WARNING!
Danger of
electric shock!
Ì Do not ever pull or lift the apparatus
through the electrical cable.
Ì Do not immerge the apparatus into
water and neither use water ets to
clean it.
Ì Always remove the plug from the cur-
rent socket before undertaking any
type of intervention on the appara-
tus or if it is left unattended or within
children or people's reach not quite
conscious of their own actions.
Ì Regularly control the feeding cable
looking for damages, cracks or age-
ing. Substitute the cable before us-
ing it further.
Ì If the feeding cable is damaged it must
be substituted by the manufacturer or
by its after sales service or in any case
by a similarly qualifi ed person, thus
preventing any possible risk.
Ì When using extension electric
wires ensure that they are ly-
ing on dry surfaces and protect-
ed against possible waterjets.
WARNING!
Risk of injury!
Ì Specialized personnel must always
carry out maintenance and repairs;
any damaged part must be substitut-
ed with original spare parts.
Ì It is forbidden to carry out changes
to the apparatus. Tampering could
cause fi res and damages even le-
thal to the user and the forfeiture of
theguarantee.
Ì The manufacturer declines any re-
sponsibility for damages caused to
people or things due to non-compli-
ance with these instructions or if the
apparatus is unreasonably used.
Do not dispose of power tools into house-
hold waste! According to the European
Directive 2002/96 EC on waste elec-
trical and electronic equipment (WEEE)
and its incorporation into national law,
power tools that are no longer suitable
for use must be separately collected and
sent for recovery in an environmental-
friendly manner.
Old appliances contain valuable materi-
als that can be recycled. Please arrange
for the proper recycling of old applianc-
es. Batteries, oil, and similar substances
must not enter the environment. Please
dispose of your old appliances using ap-
propriate collection systems.
UK
CE Declaration of conformity
We declare under our sole responsibility according
to 2006/42/EG that this product is in conformity
with the following standards or standardization
documents.
Product: Single disc machine
Typ: CT Quadro Mini
Applied harmonized standards
EN ISO 12100-1; EN ISO 12100-2; EN 60 335 – 2 –
10.1990; BS 5415 SECTION 2.2 : 1986;
Referenz-No. EM 000141; IEC34 – 1; IEC34 – 7; IEC72
–1, CEI 2 – 14, EN60204; EN60034 – 5; EN50081 – 1;
EN50081 – 2
Ulrich Menken, Geschäftsführer
Weber Cleaningparts GmbH
Münsterer Straße 8 · 65618 Selters
7