Attaching Accessories - SICO Roll N’ Set Serie Manual Del Proprietário

ATTACHING ACCESSORIES

• Step Assemblies – SICO's articulating step units can
cover the entire height range of a Roll N' Set stage
system, so the same step assemblies can be used for
any of the height within the range of your particular Roll
N' Sets. These steps assemblies come with an Own-
er's Manual. Read and follow the instructions contained
therein to ensure a secure setup.
• Ramp System – SICO's ramp provides accessibility
to the Roll N' Set stage. The slope is 1" of rise per 12"
[1cm of rise per 12 cm] of horizontal travel, with the
appropriate handrails, landings and turnarounds as
required for your particular setup. Ramp sections are
available in 6" [15cm] and 8" [20cm] rise per section.
The ramp system comes with an Owner's Manual; read
and follow the instructions contained therein to ensure
a secure setup.
• Guardrails – Guardrails are a key safety element
of any stage setup. Guardrails are recommended for
the back and sides of all stage setups. Guardrails are
generally 42" [106cm] high and are available in a variety
of widths, including 4' [1.22m], 6' [1.83M] and 8' [2.44M].
To install a guardrail:
• Lift a rail into place so its jaws slip onto the edge
of the deck.
• Turn the yellow wheels to raise the lower clamp
until the guardrail is securely attached to the deck.
• Repeat for the other guardrails.
Page 11