• Closure Drapery
• The stage drape height can be adjusted to match the
stage height selected for a specific event. There is a
strip of hook fastener along the bottom edge of the
drape and multiple strips of loop fastener parallel to the
bottom edge of the drape. For the tallest stage height,
these hook and loop fasteners are not used. For shorter
stage heights (i.e., shorter drape heights), simply align
the hook fastener from the bottom edge of the drape
with the appropriate strip of loop fastener to achieve the
desired drape length.
• Attach the drape to the deck by attaching the loop
fastener at the top of the drape to the hook fastener on
the deck edge.
• One end of the drape has a short strip of hook fastener
near the top and on the front; this allows you to overlap
adjacent drapes.
MAINTENANCE
• Lubricate pivot points periodically with a drop or two of
oil.
• The outside of telescoping parts should be wiped clean
and lubricated with a light film of oil.
• Tuffdeck deck surfaces may be cleaned with a damp
mop and soapy water. Don't let water stand of decks.
• Paint scratches may be touched up.
Page 12