Troubleshooting - Belkin Switch2 Manual De Usuario

Ocultar thumbs Ver también para Switch2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56

Troubleshooting

My computer does not boot up when connected to Switch2, but works fine when I
connect the keyboard, video and mouse directly to it.
Make sure that the keyboard and mouse cables are connected tightly between Switch2
and the computer.
Check that the USB cables are not crossed, i.e., make sure the connectors are plugged into
the correct ports.
Video
I am getting ghosting, shadowing, or fuzzy images on my monitor.
Check that all video cables are inserted properly.
Check that the monitor you are using supports the resolution
and refresh-rate setting on your computer.
Check that the graphics card you are using supports the resolution
and refresh-rate setting on your computer.
Connect the monitor directly into the computer you are having trouble
with to see if the problem still appears.
I am getting a black screen on my monitor.
Check that all video cables are inserted properly.
Connect your monitor directly to the computer to verify that your monitor
is functioning properly.
Take your computer off standby mode.
Check that the power supply is properly connected.
Troubleshooting
| 018
18-19
Troubleshooting
Keyboard
My computer does not detect my keyboard and I get a keyboard error reported at
boot up.
Check that your keyboard cable is connected properly to Switch2. Tighten any
loose connections.
Enable USB support on your BIOS.
Connect the Switch2 USB cable directly to a USB port on your computer.
Make sure that the drivers for your keyboard are installed on your computers.
Uninstall all other keyboard drivers from your computers.
Try swapping your keyboard with a different one.
Mouse
My mouse is lost when I switch to a different computer.
Check that your mouse cable is connected properly to Switch2.
Tighten any loose connections.
Attach the mouse directly to the computer with which
you are experiencing mouse problems.
Allow up to one minute after your computer wakes up from
standby mode for mouse function to return.
Deactivate power management schemes on the computer
with which you are experiencing problems.
Try swapping the mouse with a different one.
Troubleshooting
| 019
7/11/06 4:48:19 pm

Publicidad

Tabla de contenido
loading

Tabla de contenido