What You Need To Get Started; Equipment Requirements; System Requirements; How To Install Your Switch2 - Belkin Switch2 Manual De Usuario

What you Need to Get Started

Equipment Requirements

Switch2 comes with all the tools you need to share one monitor, keyboard and mouse
between your Mac mini and another computer. No additional cables or software are required.
Monitor
Switch2 supports any LCD or CRT monitor with a VGA connection
(HDDB15). You can also use your DVI monitor with Switch2 by
connecting a VGA adapter to the DVI connector. Switch2 does not
support direct DVI connections from monitors.
Keyboard
Switch2 fully supports all USB Apple® keyboards or PC keyboards, including all function keys.
If you have a keyboard with a built-in mouse hub, you may connect your mouse to the hub
and just connect the keyboard to Switch2.
Mouse
Switch2 supports any USB-based mouse.

System Requirements

Switch2 can be used with any USB-based Mac or PC desktop or notebook computer that runs
on one of these platforms:
• Windows® 2000, XP
• Mac OS® X v10.3 and above
What you Need to Get Started | 06
6-7
VGA Connector

How to Install your Switch2

Note: Before installing your Switch2, verify that your USB keyboard and mouse work properly
with your Mac mini and the other computer you will be connecting.

1. Connecting your Console to Switch2

1.1 Connect the video cable attached to your monitor
and connect it to the VGA port on the back of
your Switch2.
Note: If you are using a DVI monitor, you will
need to attach a VGA adapter to your monitor
cable before connecting it to Switch2.
1.2 Connect your keyboard and mouse cables to the
two USB ports on the back of your Switch2.
Note: If your mouse plugs into your keyboard, you
only need to connect your keyboard cable to Switch2.
You can connect a USB peripheral device to the
mouse port instead.
How to Install your Switch2 | 07
7/11/06 4:48:03 pm