Operation And Use; User Interface; Buttons And Interface - Sime ECOMAXI 160ErP Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation, use and maintenance manual
7

OPERATION AND USE

The product is managed through a user interface
which allows you to:
set the operating mode;
change the operating parameters;
view and manage any alarms;
check the status of the resources.
Hereinafter, "switching on" should be
understood as the passage from stand-by
mode
to
ON
"switching off" should be understood as
the passage from ON mode to stand-by
mode.
Hereinafter,
procedure" should be understood as
referring to specific appliance procedures
as described in the "advanced set-up"
section.
7.1

USER INTERFACE

The user interface (Fig. 15) allows you to check and
adjust appliance operation. It is equipped with a
display and the following buttons:
On/Stand-by button;
SET button;
DOWN button;
UP button.
SET
On/Stand-by
button
button
Fig. 15 – User interface
7.1.1

BUTTONS AND INTERFACE

7.1.1.1
On/Stand-by button
mode,
and
the
the
term
"advanced
Display
DOWN
UP
button
button
Use this button to:
turn the product on (ON status);
put the product in stand-by mode (in this
mode,
automatically according to specific time
settings and automatically activate the anti-
legionella and defrosting functions).
When the appliance is powered up, it
keeps the same status as when the power
supply was disconnected.
7.1.1.2
[SET] button
term
Use this button to:
confirm a selection or value set.
7.1.1.3
[UP] button
Use this button to:
scroll up through the list of parameters;
increase the value of a parameter.
7.1.1.4
[DOWN] button
Use this button to:
scroll down through the list of parameters;
decrease the value of a parameter.
7.1.1.5
Interface display
The interface display (Fig. 16) shows the:
control temperature;
alarm/error codes;
status notifications;
operating parameters.
Compressor
LED
Defrosting LED
MF LED
Fan LED
MANUAL CODE: 6328407
the
appliance
Fig. 16 – User interface display
If it is on: the compressor is
active.
If it is flashing:
The compressor is in
the
switching on.
The operating setpoint is
being modified;
If it is on: defrosting is in
progress
If it is on: the electrical resistor
on the boiler is active
If it is on: the fan is active
can
operate
process
of
Page 57 / 148

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8115810

Tabla de contenido