Kunzle & Tasin Bona Scorpion DCS Manual De Funcionamento página 16

Inbetriebnahme der Maschine
4.
Replace the head, securing
it to the trunk with the
clamping hooks.
8.
Fit the abrasive (A) to the Fit the abrasive (A) to the
drum (B) according to
the 'Abrasive Assembly
Procedures' on pg. 18.
12.
Connect the plug to the
socket.
16
5.
Locate the power supply. The
socket must be compatible
with the plug. To avoid
electrical hazards the socket
must be grounded with a 20
A fuse.
9.
Ensure the lever is engaged
(A) and the drum is raised
from the floor.
13.
Switch on the extractor by
pressing the switch on the
head (A).
6.
Keep the cable away
from the pathway of
the machine.
10.
Close the abrasive safety Close the abrasive safety
guard (A).
14.
Stand behind the handle and release
the drum lifting lever (B) by releasing
the red knob (A). Then, start the motor
by pressing the 'Start' button (C).
Bona Scorpion DCS Manual
7.
Turn the belt guard upwards
(A).
11.
Check the motor cable is Check the motor cable is
connected to the socket
on the extractor head and
handle/motor interconnection
cable is plugged into the
socket on the side of the
motor box.