Storage; Transporting And Handling; With One Person - Kunzle & Tasin Bona Scorpion DCS Manual De Funcionamento

Operator Safety (Cont.)
Airborne sanding dust should not be breathed in while
operating a sanding machine. Always wear an approved
particulate respirator while operating sanding equipment.
Injury to the eyes and or body can occur if protective clothing
and or equipment is not worn while sanding. Always wear
hearing protection, and a dust mask while sanding.
Exposure to high noise levels can cause hearing loss or
impairment. Wear EN-ISO approved hearing protection
(earmuffs) when using this equipment.
Bodily injury could occur if power is supplied to the machine
with the power switch already in the "ON" position. Always

Storage

It is advisable to store the machine in its original packaging.
Doing so makes it possible to form a column of two packages
maximum, with one on top of the other.
If the machine is removed from the original packaging and is
not used for some time ensure the wheels and drum are not in
contact
with the ground. In this case use two supports at least 50mm in
height to rest the machine on, ensuring contact is with the
base frame.

Transporting and Handling

With one person

6
Handle
Request assistance to lift the machine due to its heavy weight.
The machine can be dismantled into several parts to facilitate transportation:
Extraction unit
check to assure the power switch is "OFF" before connecting
the machine to its power source.
DO NOT use this machine to sand steps or furniture.
DO NOT ride on this machine.
Check filters. Clogged filters may lead to overheating and
subsequent electrical problems which may lead to machine
failure or electrical shock.
DO NOT put any objects into openings. DO NOT use with
blocked openings. Keep free from dust, lint, hair or anything
that may reduce airflow.
This equipment is for dry use only and must not be used or
kept outside in wet conditions. Store the machine in a dry
building, otherwise the machine could be damaged. Storage
temperature
from -20°C to 50°C.
Basket holder
(with handle if required)
Bona Scorpion DCS Manual
Base frame with
drum and motor