Maintenance And Care; Further Information - Swarovski Optik EL Range Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
7.4. trouBlEshooting and disPlay information
Problem
Probable cause
The field of view
The eyecups have
is shaded at the
not been adjusted
periphery
correctly for use
(vignetted).
with or without
spectacles.
The display
1. The measure-
shows "----" for
ment range has
the distance
been exceeded.
measured.
2. The object is not
reflective enough.
3. Target out of focus.
The display
1. The distance to
shows "co" for
the target is shorter
the distance
than the minimum
measured
measurement range.
(clean optic).
2. The objective lens
is dirty.
The aiming mark
The battery is low.
flashes when the
instrument is
switched on.
Display, aiming
Dioptric adjustment
mark and target
is not optimal.
are not all in focus
at same time.
"Err" appears on
Electronic fault
the display.

7.5. furthEr information

You will find comprehensive information
and tips at: www.SwAROVSKIOPTIK.COM.
34
EL RANGE / EN
EL RANGE / DE
remedy
Spectacle wearers
need to twist the
eyecups right in to the
stop position. when
using without spec-
tacles, the eyecups
need twisting out to the
required position (see
chapter 3.1.).
1. See chapter 4.
2. See chapter 7.1.
3. See chapter 3.5.
1. See Technical Data
Sheet.
2. Clean the objective
lens.
There is sufficient
power for around 100
more measurements.
Replace the battery
or briefly warm the
current one.
See chapter 3.4.
Press the measure-
ment button again. On
repeated occurrence
of "Err", please contact
SwAROVSKI OPTIK
customer service.
8.

MAINTENANCE AND CARE

8.1. lEns-clEaning cloth
You can clean high sensitive lens surfaces with the
enclosed special microfibre cloth. It is suitable for objecti-
ve lens, ocular lens and spectacles.
Please keep the cloth clean, as dirt can damage the lens
surface. If the cloth becomes soiled it can be washed in
lukewarm soapy water and left to dry. Please only use for
cleaning lens surfaces!
8.2. clEaning
we have designed all elements and surfaces to require
little care.
To ensure the long-lasting optical brilliance of your binocu-
lars, you should keep the glass surfaces free of dirt, oil and
grease. when cleaning the lenses, first remove larger par-
ticles with an optical lens brush. For the subse-
quent thorough cleaning we recommend breathing
onto the lens surface to form a coat of condensa-
tion and then cleaning it with a soft, moist cloth.
The housing is best cleansed with a soft, moist cloth
(don't use the lens-cleaning cloth).
In the event of hard-to-remove dirt (e.g. sand) the eye
cups can be unscrewed and cleaned easily.
EL RANGE / EN
EL RANGE / DE
35

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

46774

Tabla de contenido