WEG CFW70X-3 Guia De Instalacion página 12

External Power Supply for Control in 24 V - KVDC-CFW70X-3
Step
12
Connect the supplied 160-mm ribbon-cable (e) to the XC60 connector (CC11) of the
Make sure the position of the ribbon-cable is as shown in the figure.
13
14
12 | CFW70X
Actions/Instructions
Frame sizes A and B
VDCx board, as shown above.
Frame sizes A and B
Fold the ribbon-cable as indicated.
Frame sizes A and B
Fasten the clamp (f), fixing the two ribbon-cables as indicated.