Label - WEG CFW70X-3 Guia De Instalacion

External Power Supply for Control in 24 V - KVDC-CFW70X-3
Step
17
18
Assemble the front cover, tighten the two screws and then fit the HMI in.
Figure 2: Instructions to assemble the KVDC kit on the inverters with frame sizes A and B

4 LABEL

Put the two labels (h) supplied with the product after installing the kit on the inverter.
Those labels indicate that the inverter features the KVDC kit, which was not supplied from factory.
The labels must be put next to the product identification labels: one close to the big label, located
on the side of the inverter, and the other close to the label located under the HMI.
14 | CFW70X
Actions/Instructions
Frame sizes A and B
Fit and tighten the two screws on the bottom.
Frame sizes A and B