Check After Installation - WEG CFW70X-3 Guia De Instalacion

External Power Supply for Control in 24 V - KVDC-CFW70X-3
Side of the inverter Under the HMI
Figure 3: Suggested location to put up the labels supplied with the KVDC kit

5 CHECK AFTER INSTALLATION

After the installation of the kit in the inverter is concluded, power up the inverter and see if the
content on the parameter P0029 (Configuration of Power Hardware), on the bit 10 = 0.
For a description of the inverter operation with the KVDC kit refer to the user's manual in the
chapter for optional items.
CFW70X | 15