Procedures To Install The Kit On The Inverter; Frame Sizes A And B - WEG CFW70X-3 Guia De Instalacion

External Power Supply for Control in 24 V - KVDC-CFW70X-3
Select the parts to be assembled on the inverter according to table 1; there are differences
according to the models.
Table 1: Items to be assembled according to the inverter model
VDCx Electronic Board (a)
Metal spacer 28 mm (b)
Plastic spacers 28 mm (c)
Insulation for the board (d)
Ribbon-cable 160 mm (e)
Clamp for ribbon-cable (f)
M3 Screw
Label (h)
Notes:
1 For information on the inverter frame size, check the technical specification table (tables B.1 and B.2 on the user's manual of the CFW700 / CFW701)
2 In case the replacement of the existing screw is needed.

3 PROCEDURES TO INSTALL THE KIT ON THE INVERTER

3.1 FRAME SIZES A AND B

Step
1
6 | CFW70X
Description
Frame Size A
(g)
2
Actions/Instructions
Frame sizes A and B
Remove the HMI.
Quantity by Inverter Model
(UN)
CFW70X
Frame Size B
1 1
1 1
3 3
- 1
1 1
1 1
1 1
2 2
1
.