Bluetooth ® Connection - Tru-Test ERS Guia De Inicio Rapido

Bluetooth
5
Bluetooth
To establish a
Bluetooth
enabled indicator, you need to 'pair' the two devices. The EID reader can
be paired with any Tru-Test
devices.
Note:
When connecting the EID reader wirelessly to a Tru-Test indicator, always turn
the indicator on BEFORE the EID reader.
1
2
3
4
5
6
7
8
®
connection
wireless connection between the EID reader and a Tru-Test
Bluetooth
enabled indicator and to some third party
With both devices off, position the EID reader within 30 cm of the
indicator.
Switch on the indicator and, if necessary, check that its
setting is enabled.
Switch on the EID reader.
Press to display the Settings screen.
Select to display
Bluetooth
Make sure
Select
.
A list of available devices will be displayed.
Select a device.
Wait for up to 2 minutes until the two devices are paired. When
pairing is complete, the
changes to green .
Use the EID reader to scan an EID tag in order to test the
connection.
Bluetooth
settings.
is set to ON.
Bluetooth
icon at the top of the screen
Bluetooth
5