Individual Settings - Kettler SD4 Instrucciones De Entrenamiento Y Manejo

Training and Operating Instructions
> =
> =
> =
> =
> =
30
GB
=>
=>
=>
=>
=>
=>

Individual settings

Proceed according to the scheme: press "Reset"
Display: all segments
now press "SET" longer: menu: Individual Settings
Display:
Reset +/–, total kilometers and training time
1. Delete total kilometers and training time
Jointly press "Plus" + "Minus"
Function: Delete display: "Reset O.K."
Press "Set": switchover to next setting
Display:
Store
Or:
Skip deletion of total values by just pressing "SET"
Display: Store
2. Storage of defaults
Press "Plus" or "Minus"
Defaults time, energy, distance, age, target pulse are
permanently stored
Function:
ON = Storage also after "Reset"
Off = Storage until next "Reset"
Press "Set":
Switchover to next setting
Display:
Metric or English
3. Display of the unit in kilometers / miles
Press "Plus" or "Minus"
Function: selection of kilometer or miles display
Press "Set": selected unit is accepted and switchover to
the next setting
Display:
Temp.
4. Display of temperature in °C / °F
room temperature only SD4-9)
Press "Plus" or "Minus"
Function: Select °C or °F
Press "Set": selected unit is accepted and switchover to
the next setting
Display: Energy.
5. Display of energy consumption kjoule / kcal
Press "Plus" or "Minus"
Function: Selection of the energy consumption display
Press "Set": selected unit is accepted and switchover to
the next setting
Display: Energy
6. Display of mechanical / human energy turnover
Press "Plus" or "Minus"
Function: selection of the energy turnover display
real.: the energy turnover of the training person with 25 %
efficiency.
phys.: the energy turnover of the device, calculated purely
physically.
Press "Set": selected unit is accepted and switchover to
the next setting
Display: Alarm sound ON/OFF
(display of the