Watching Tv; Turning On/Off The Power; Ez Setup - Sharp AQUOS LC-32LE450U Manual De Operación

Watching TV

Turning On/Off the Power

Press POWER on the TV, or POWER on the remote control
unit to turn the power on.
Press POWER on the TV, or POWER on the remote control
unit again to turn the power off.
POWER
INPUT
disappears.
1
2 3
NOTE
POWER
be sure to remove the AC cord from the AC outlet.
the TV is turned off.
to standby mode automatically.

EZ Setup

When you turn on the TV for the first time, the EZ
Setup will guide you through the setup process.
Perform the following steps before you press
POWER on the remote control unit.
1. Insert the batteries into the remote control
unit. (See page 11.)
2. Connect the antenna cable to the TV. (See
page 10.)
3. Plug in the AC cord to the AC outlet. (See
page 8.)
1. Language Setting
Spanish, or French.
/ to select the desired language
listed on the screen, and then press ENTER or
to the next step.
EZ Setup Language
Please select your language: English
Français
Español
Select Next
ENTER
20
2. TV Location Setting
Select "Home" or "Store" for the location where
you plan to install the TV. This product qualifes for
ENERGY STAR in Home mode default setting.
/ to select "Home" or "Store"
and press ENTER or to the next step.
EZ Setup TV Location
TV Location Home
Store
This product qualifies for ENERGY STAR in Home mode.
Back Select Next
ENTER
3. Time Zone Setting
to select the current local time zone.
Press ENTER or to continue to the next
screen.
Watching TV
EZ Setup Time Zone
Please select your time zone: Hawaii
Alaska
Pacific
Mountain
Central
Eastern
Atlantic
Newfoundland
Back Select Next Exit
ENTER EXIT
4. Air/Cable (Antenna setting)
with your TV when selecting "Air" or "Cable".
/ to select "Air" or "Cable" and
press ENTER or to the next step.
EZ Setup Tuner
Please select your tuner mode: Air
Cable
Back Select Next Exit
ENTER EXIT
5. Start Channel Scan
Channel auto search makes the TV look for all
channels viewable in the set area.
press / to select "Scan", and then press
ENTER or to start auto seach.
EZ Setup Channel Scan
First, please connect Cable or Air. Scan
Start Channel Scan now? If you
Skip Scan
skip this step, the Channel Scan
could be performed in Setup
menu later.
Back Select Next Exit
ENTER EXIT
NOTE
During channel searching
EXIT, TV will exit EZ Setup.
performed in the Setup Menu. (See page 31.)
6. Completed
After setting complete, the screen will show "Status:
Scan Complete", press ENTER or to finish the
EZ Setup.The TV will then switch to the first channe
found.
EZ Setup Channel Scan
First, please connect Cable or Air. Scan
Start Channel Scan now? If you
Skip Scan
skip this step, the Channel Scan
could be performed in Setup
menu later.
Analog Channel Found: 5
Digital Channel Found: 6
Status: Scan Complete
100%
Back Select Next Exit
ENTER EXIT
NOTE
complete. Please wait until you see the Auto
programming complete message.
21