Installation - Midland M ZERO PLUS Manual Del Usaurio

Ocultar thumbs Ver también para M ZERO PLUS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 44

INSTALLATION

Washers
Screws
Screws
Washers
Safety and convenience are the primary consideration for mounting any piece of
mobile equipment. All controls must be readily available to the operator without
interfering with the movements necessary for safe operation of the vehicle. Be sure
all cables are clear of the brake, clutch and accelerator. Also, thought must be given
to the convenience and comfort of passengers.
Another extremely important requirement is the ease of installation and removal
for those occasions when you might want to remove the unit for service and main-
tenance.
The most common mounting position for a transceiver is under the dashboard di-
rectly over the drive shaft hump. Do not mount the transceiver in the path of the
heater or air conditioning air stream. Take your time and plan your installation care-
fully. When you have determined the best location for mounting, use the mounting
bracket as a template to mark mounting holes. Take care when you drill the holes
that you do not drill into wiring, trim or other accessories.
M Zero Plus Instruction Guide
Nuts
Washers
Screws and
washers
Nuts
Bracket
Screws
Washers
| 5

Publicidad

Tabla de contenido
loading

Tabla de contenido