Descargar Imprimir esta página

Hewi 801 Serie Instrucciones De Instalación Y Funcionamiento página 7

Ocultar thumbs Ver también para 801 Serie:

Publicidad

Proper use in accordance with Directive 93/42/EWG
HEWI stationary and hinged support rails have been
designed for use in bathrooms and toilets. They provide
grip and support, and assist the independent standing
and sitting of persons with/without physical impairment.
Warning
∙ The HEWI stationary- and hinged support rails
are designed for a maximum static working load of
100 kg vertically.
∙ A certain amount of vertical sag under load is
normal. In case of damage, e.g. exceeding of the
working load, the stationary- and hinged support rails
must no longer be used.
∙ Do not use the stationary- and hinged support rails
for any purpose other than that for which it is inten-
ded, e.g. do not use it as gymnastics equipment or
as a climbing aid or step.
∙ When the stationary- and hinged support rails are
folded down ensure that there is no part of the body
under the product.
∙ Improper installation/use can cause accidents and
injuries.
∙ Mounting only by persons familiar with mounting of
the product and appropriate qualifications for their
activity.
∙ The wall on which the stationary- and hinged support
rails are to be installed mustbe flat, firm and capable
of taking the load. Only use fixing materials approved
by the wall anchor manufacturer for the intended
purpose. In case of doubt, contact HEWI's customer
service tel. 0044 1634 258200 (UK), 0049 5691 82-0
(International).
∙ After installing the stationary- and hinged support
rails, perform a functional test.
∙ On acceptance the product must be checked for
damage; any defects must be reported immediately.
The product must be stored in a dry place and
free from pressure, e.g. no other items stacked on
top of it.
∙ The installer must pass on the installation and use
instructions to the user and they must be kept for
the whole life of the product.
∙ The toilet roll holder is not suitable as a carrying
handle for stationary- and hinged support rails.
∙ The maximum static working load of stationary-
and hinged support rails does not increase the
because of the floor support.
Montagehinweis | Mounting information | Consigne de montage | Montagetip
Indicazioni per il montaggio | Indicaciones de montaje | Wskazówki do montażu
Care and cleaning instructions
HEWI products are easy care and easy to clean.
Frequently, occasional wiping with a damp cloth is
sufficient. If using cleaning products the following
should be noted:
∙ Only use cleaning products with a pH value
between 6 and 8.
∙ Cleaning products that contain detergents such as
phosphates, soaps and tensides (surfactants) as
their active substances can be used.
∙ Please note and follow the cleaning product manu-
facturers' instructions (concentration, contact time).
∙ Do not use alkali, acidic or chlorine-based cleaning
products or cleaning products with scouring agent
additives.
∙ Do not use any scouring cleaning equipment, e.g.
brushes.
∙ Do not apply the cleaner directly to the surface, but
always pour it on the cleaning cloth instead.
Maintenance
The HEWI stationary and hinged support rails are not
maintenance free! The stationary and hinged support
rails must be checked monthly by qualified personnel
to ensure that it is in perfect working order. In case of
defects (e.g. braking force too small) the relevant steps
given in the installation and use instructions must be
taken.
Disclaimer
HEWI does not accept any liability whatsoever for
personal injuries or damage to property that is or has
been caused due to incorrect assembly, installation or
use, especially due to disregard of the listed warnings
and safety instructions.
Disposal
Proper disposal is subject to the applicable national
statutory regulations.
HEWI | 7

Publicidad

loading