Lenze L-force 9400 Instrucciones Para El Montaje página 21

Displays
Pos. Colour
MS Green
EN Yellow
ME Red
PS Red
DE Red
EDK94AYAD DE/EN/FR/ES/IT 2.0
State Description
On Drive-based safety is initialised faultlessly.
Drive-based safety is initialised faultlessly. Internal
Blinking
communication to the standard device is not possible.
Off Drive-based safety is not initialised.
Acknowledgement is not possible.
On Controller enabled
Off Non-safe display "STO"
System error:
After a serious internal error, STO is activated.
On
Can only be reset by switching the 24V supply.
Error:
After an internal error or an error at the safe
inputs, a standstill function is activated.
Blinking
The safety class is quit.
Acknowledgement is possible.
Fault:
A monitoring function has responded and
activated a standstill function.
Flashing
The safety class is not quit.
Acknowledgement is possible.
Off Error-free operation
Error PROFIsafe:
Communication is not possible.
On
Acknowledgement is possible.
Blinking No valid PROFIsafe configuration
Off PROFIsafe is error-free.
The module is not accepted by the standard device
(see notes given in the documentation for the
On
standard device).

21