Sanus VMT35 Manual De Instrucciones página 8

3 Hang TV onto the Wall Plate
[03]
3-1 Engage brackets to the mount
4 Adjust Tilt Tension
8
HEAVY!
TV / Bracket assembly by fitting the top hooks of the mounting
brackets [02], [03] over the top edge of the wall plate [01].
[02]
Swing the mounting brackets [02], [03] down until the spring
loaded locking tabs slip over and fully engage the bottom edge of
the wall mount. You will hear an audible "CLICK".
[01]
[02, 03]
Adjust tilt tension with the bracket knobs. Use either the hex key
[18], or adjust by hand.
You will need assistance with this step. Install the
[01]
6901-002150 <00>