Set The Battery Capacity Setting; Set The Charged Voltage Setting; State Of Charge Settings; Set Auxiliary Input Function - Victron energy SmartShunt 500 A Manual

Most settings can be kept by default. But there are a few settings that need to be changed. These are:
• Battery capacity.
Charged voltage.
•
State of charge or start synchronised.
•
• The functionality of the auxiliary input (if used).
Should you want to find out what all the other settings mean, see paragraph 7.1: "Battery settings".

Set the battery capacity setting

4.5.1
This setting can be found in VictronConnect > Settings > Battery.
The SmartShunt is by default set to 200Ah. Change this value to match your battery capacity. For more
information about battery capacity see paragraph 7.1.1: "Battery capacity".

Set the charged voltage setting

4.5.2
This setting can be found in VictronConnect > Settings > Battery.
The SmartShunt is by default set to 0.0V. The SmartShunt does not automatically detect the system voltage like
the BMV does. You will need to set the "Charged voltage".
These are the recommended "Charged voltage" values:
Nominal battery voltage
12 V
24 V
36 V
48 V
For more information about the charged voltage setting see paragraph 7.1.2: "Charged voltage".
4.5.3

State of charge settings

This setting can be found in VictronConnect > Settings > Battery.
When powered up for the first time, the SmartShunt will by default display 100% state of charge. If you want to
change this to a different value, then it is possible to manually set the state of charge value. For more information
see paragraph 7.1.10: "Battery starts synchronised" and paragraph 7.1.11: "State of charge".

Set auxiliary input function

4.5.4
This setting can be found in VictronConnect > Settings > Misc.
11
Recommended charged voltage
setting
13.2 V
26.4 V
39.6 V
52.8 V