vitapur VWD1076BLST Manual De Uso Y Cuidado página 8

Installation Of The Faucet
(NO TOOLS REQUIRED)
STEP 1.
Make sure the power cord is disconnected.
Remove the faucet from the lower compartment.
Remove the hygene cover from faucet adapter(A).
Remove the red silicone plugs from the faucet
adapter(B).
STEP 2.
Check the faucet making sure silicone o-rings
are installed. (See Fig. 2)
WARNING: DO NOT INSTALL THE FAUCET
IF ANY O-RINGS ARE MISSING. NOTE: For
your convenience we have included 2 spare
silicone o-rings inside the instruction manual
enclosure package.
STEP 3.
Align the faucet nipples with the faucet adapter.
(See Fig. 2)
STEP 4.
Insert the faucet nipples into the faucet adapter.
(See Fig. 2)
STEP 5.
Connect the faucet to the adapter using the
faucet ring turning in a clockwise direction until
firmly secured. (See Fig. 3)
CAUTION: HAND TIGHTEN ONLY
STEP 6.
Check the bottom of the faucet for leaks during
operation. If a leak is detected, remove the faucet,
check the o-rings are not displaced. Repeat
STEPS 3-6.
Fig. 1
Faucet Adapter
A. B.
Fig. 2
Faucet Assembly
Silicone o-rings (4pcs)
Fig. 3
Faucet Ring