Filter Cleaning
•Please clean the Sand Storm filter about once a month.
•Please check every filter when the filter checking light is on.
1⃞
Ensure to shut down before cleaning.
Hold knob then pull forward, open the front panel.
2⃞
Pull out filter from mainframe and ready to clean or replace.
3⃞
Clean Sand Storm filter by vacuum cleaner or soft brush.
Wash by neutral detergent when seriously clogged.
4⃞
Smoke filter cleaning instruction.
Soak the filter in a warm water with a neutral detergent for 1 hour.
Remove sediments from the filter by shaking the filter in the water.
Rinse out the filter. Completely dry the filter under a well ventilated
shade.
Ionization wire inside of the case is very fragile. Please give an extra care when cleaning the product.
Do not brush the Smoke Filter.
(It may peel off filter coating, resulting a performance decrease)
Do not use hot water over 40
28
℃ or volatile detergent.
Air Purifier