Lista De Piezas; Leak Check - Coleman Dual Fuel 414 Instrucciones De Uso

Lista de piezas

Encendido estándar
No. 428
1 220C1401
2 220A6201
3 414-6601
4 414-5621
5 413D3461
6 R413-149T
7 425A3451
8 426A5281
9 426-3141
10 414-5601
11 639-1091
12 413B4971
13 N/A
14 N/A
15 200-6381
Español-10
VEA EL DETALLE "A"
VEA EL DETALLE "A"
Descripción
Tapa de combustible
Juego de reparación de la bomba
Válvula y generador
Generador
Quemador auxiliar
Perilla de la válvula
Quemador principal
Conjunto del colector
Rejilla
Ensamblaje del Tanque
Taza de bomba y presilla
Presillas de los defl ectores de viento
Conjunto de encendido
Perilla de encendido
Ensamblaje de válvula de retención y tubo
■ Place tank on level surface resting at
angle shown. (Fig. 2)
■ Remove FUEL CAP. Use a funnel or
suitable fi lling device and fi ll with
clean, fresh fuel.
■ Replace FUEL CAP on tank and
on fuel container. Tighten fi rmly.
WIPE UP ANY SPILLED FUEL AND
DISPOSE OF IN A SAFE PLACE.
Pumping
■ Be sure FUEL VALVE is OFF
(Fig. 4) and FUEL CAP is fi rmly
closed (Fig. 5).
■ Open PUMP KNOB one full turn.
(Fig. 6)
Fig. 2
■ Place thumb over hole in pump knob
and pump approximately 30 full
strokes. (Fig. 7)
■ Close PUMP KNOB. (Fig. 8)
Fig. 3

Leak Check

■ Make sure FUEL VALVE is fully
"OFF".
■ CHECK FOR LEAKS in one or more
ways. Look for fuel mist or a wet
appearance of fuel on surfaces.
Listen for hiss of escaping gas. Smell
for fuel odor. Never use a fl ame. Do
not use if leaking. (Fig. 9)
Fig. 4
CHECK CHECK
FOR FOR
LEAKS LEAKS
Fig. 5
English-4
Fig. 6
Fig. 7
Fig. 8
CHECK
FOR
LEAKS
Fig. 9