5. USE INSTRUCTIONS
The temperature of the device is adjustable between 5°C to 20°C. The temperature is regulated by a
thermostat. Changing the temperature generates higher energy consumption.
The appliance assures that temperature is maintained as long as it is in operation and that it is used in normal
conditions of use. The temperature inside the appliance and its energy consumption can be influenced by
many factors: ambient temperature, exposure to the sun, number of door openings and quantity stored...
Slight changes in temperature are perfectly normal.
➢ DISPLAY BOARD
Modes
Red LED indication of the selected temperature range.
H
(temperatures between 15 ° C and 20 ° C or 59 ° F and 68 ° F)
White LED indication of the selected temperature range.
I
(Temperatures between 9 ° C and 14 ° C or 48 ° F and 58 ° F)
Yellow LED indication of the selected temperature range.
J
(Temperatures between 5 ° C and 8 ° C or 40 ° F and 47 ° F)
Press the button to turn on/off the light, lighting switches off automatically after 10 minutes.
K
Display shows the temperature at its setting, 10 seconds later it will automatically turn to actual
temperature inside the wine cellar till reaching the setting one
If the temperature is too high (>30°C), the code "HH" appears on the display and an audible alarm
sounds.
The audible alarm can be deactivated immediately by pressing the "on" / "off" button or by
L
unplugging the cellar. In this case please contact the after-sales service.
If the temperature is too low (<3°C), the code "LL" appears on the display and an audible alarm
sounds.
The audible alarm can be deactivated immediately by pressing the "on" / "off" button or by
unplugging the cellar. In this case please contact the after-sales service.
Temperature displayed in Fahrenheit.
M
Temperature displayed in Celsius.
N
Press the button to raise the temperature of 1 degree Celsius or Fahrenheit.
O
Press the button to lower the temperature of 1 degree Celsius or Fahrenheit
P
Select temperature display in Celsius or Fahrenheit by pressing once
Q
On/off switch. When you plug the device into a power outlet, it automatically turns on with actual
temperature shows in the display, till reaching the memoried setting (setting temperature before
R
turn off)
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the displays,
interior light and audible alarms and prevents them from turning on again. Normal cooling operations will still
take place. To initiate sabbath mode, press the power (R) and light (K) keys at the same time for at least 3
22