Installation; Packaging And Unpacking; Installation (Service Technician) - Bartscher 2955041 Manual De Instalación, Uso Y Mantenimiento

7. PROBLEMS DURING OPERATION
The information below is provided to recognize
and repair any failures that may occur when
operating the device.
Problem
Gas smell
Ignition flame does not start.
The flame still does not start.
The ignition flame burns, but
the igniter does not ignite the
burner.
Yellow flame.
8.

INSTALLATION

8.1.

Packaging and unpacking

During unloading and when installing the device
follow the information from the manufacturer
placed directly on the packaging and in this
manual.
To lift and transport the product plan to use a fork
lift or stacker, and pay attention to even weight
distribution to avoid a risk of tilting of the
packaging (avoid excessive incline!).
While using the elevator pay
attention to the gas supply hoses and
position of feet.
The packaging consists of the carton packaging
and wooden pallet. There are symbols printed on
the carton packaging that according to the
international agreements
regulations to follow when loading and unloading,
transporting and storing the appliance.
Cause
The smell is sometimes released
when extinguishing the flame
The igniter does not work.
Air in the pipes in connection with
the long downtime.
The thermocouple is not hot
enough
Contaminated burner or blocked
extractor.
inform about the
9
Some of the failures can be repaired by the user,
others require thorough specialist knowledge.
Such problems may be solved exclusively by the
qualified personnel.
Possible solution
Close the gas valve and air the room.
Check the operation of the igniter.
Ignite the flame manually.
Extend the ignition process.
Check whether the safety
thermocouple is released.
Check the working thermostat.

If the problem continues,
contact the customer service.
Clean the burner and leave to dry off.

If the problem continues,
contact the customer service
THIS CAUTION
SIDE UP GLASS
When collecting the goods check if the packaging
is complete and has not been damaged during
transport.
Any damage should be immediately reported to
the shipping company.
Unpack the device as soon as possible to check if
the device is not damaged.
Do not use a sharp object to cut the carton box. It
may damage the stainless steel inside the box.
ENGLISH

.
KEEP DRY
GB