Vertilux VTi Celtic 35 Serie Manual De Programación página 4

DO NOT USE A HAMMER ON THE MOTOR
Do not knock the motor or drill on motor tube, this may affect its operation and void its warranty.
DO NOT SET LIMITS USING A DRILL
The use of a drill to adjust limits may cause permanent damage to the limit screws and void the warranty.
Pairing the motor with the remote control
1. Turn OFF the AC power input. Then select the
desired channel and press and hold the
on the remote control
power. The motor will
2. Press the up button
"jogs". The motor is now paired with the remote
control.
up button
3 s. Then, turn ON the AC
"jog" once.
again until the motor
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
DO NOT DRILL INTO MOTOR TUBE
ONLY USE THE PLASTIC HEXDRIVER THAT
COMES WITH THE MOTOR TO SET THE LIMITS
UP
OFF
BUTTON
UP
BUTTON
ON
vertilux.com
3