Checking The Direction Of Rotation - Vertilux VTi Celtic 35 Serie Manual De Programación

Checking the direction of rotation

This function must be done before setting the limits and is convenient when the need arises to
change the rotation of the motor. For example, when pressing the
the shade goes down, or when pressing the
1. Press and hold the
until the motor "jogs".
2. Press the down button
The motor has now changed its direction.
Setting or modifying limits depending on the type of installation
MOTOR ON THE LEFT
LEFT
POSITION I
LIMIT ADJUSMENT
SCREW (GREY)
SETS LOWER LIMIT
Clockwise direction: increases limit.
Counter-clockwise direction:
decreases limit.
vertilux.com
4
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
stop button for about 5 s
until the motor "jogs".
RIGHT
POSITION II
LIMIT ADJUSMENT
SCREW (YELLOW)
SETS UPPER LIMIT
down button, the shade goes up.
LEFT
POSITION I
LIMIT ADJUSMENT
SCREW (GREY)
SETS UPPER LIMIT
The icon in each hexagonal set screw
indicates the motor's direction of rotation.
up button on the remote control
STOP
BUTTON
DOWN
BUTTON
MOTOR ON THE RIGHT
POSITION II
LIMIT ADJUSMENT
SCREW (YELLOW)
SETS LOWER LIMIT
RIGHT