Preparing and Loading the Dishware (ooot o.o¢
Top Rack Accessories
Knife
Rack
The knife rack is an extra shelf for knives and
other large utensils,
tt is assembled
onto an edge
of the upper rack.
Figure 5
Place knives
with sharp
sides down,
see Rg. 5.
Loading the Top Rack
Rgure
6 shows
how to arrange
a typbal
mixed
load in the
top rack.
Figure 6
Figure 7
shows
how
to arrange
items from
a typbal
10 place
setting
in
the top rack.
Figure 7
NOTE:
When pushing
the top rack into the
dbhwasher,
push it until it stops against the back
of the tub. Otherwbe,
the top rack spray arm may
not connect
to the water supply.
Bottom
Rack Accessories
Flip
Tines
Flip Tines fold down to make loading the racks
easbr
in some instances.
Fiaure 9
Grasp the
tines
as shown
in Figure 9
and fold
the tines
downward.
Rack Attach merit
The rack attachment
has two additional
cup
shelves
upon whbh
to place cups and large
kitchen
utensils.
The rack attachment
is as=
sembled
on the rear edge of the lower rack.
To assemble:
Slide the Rack Attachment
in, Figure 11, keeping
the longest tines on the inside of the top basket
wire (a) and on the outside of the lower basket
wire (b), see Fig. 10.
The short tines will snap into place, see Figure
12.
Figure 11
Figure 10
Figure
8 shows
the top rack
load pattern
for 12 place
settings.
(AHAM DW-1 10 Place Setting)
Figure 8
(AHAM DW-1 12 Place Setting)
Rack Attachment
Use
To use the rack
attachment,
fold
down the cup
shelves
and place
items to be
washed,
see
Figure 12.
Figure 12