Greenlee DM-860 Manual De Instrucciones página 9

Using the Features (cont'd)
• SELECT Press momentarily to toggle between functions, or to toggle between AC, DC, and
DC + AC when measuring current and voltage.
• RANGE Press once to enter the manual ranging mode. The
the display. Press repeatedly to step through the ranges. Press and hold to return to the
automatic ranging mode.
Note: Manual ranging mode is not available in Hz function.
• Hz Press to measure frequency when the meter is set to read voltage or current.
Note: The sensitivity of the frequency measurement function varies with the measurement
range. To automatically select a sensitivity level, measure the voltage level first and then
press Hz . If the reading becomes unstable or if the display is blank, manually change
the sensitivity by momentarily pressing RANGE .
• HOLD Press momentarily to hold the present value on the display. Press again to exit
this mode. This feature does not affect the bar graph.
• Beeper The unit normally beeps when any feature button is pressed. To disable, press
Hz while turning the meter on to disable the pushbutton beeper.
Note: The continuity beeper and input error warning features remain enabled.
DM-860
icon will disappear from
9