cLeAning unDer uSer'S
reSpOnSiBiLity
Some images could be offset from the original model.
DAiLy
Burn pot: remove the burn pot from the relevant
compartment and free the holes using the appropriate fire
irons supplied, remove the ash from the burn pot using
a suction device. Suck the ash deposited in the brazier
compartment.
Scrapers:
Cleaning of the heat exchangers allows to guarantee
constant heat output through time. This type of
maintenance must be performed at least once a day. To do
this, just use the relevant scrapers positioned in the upper
part of the stove, moving them up and down several times.
WeekLy
cleaning the ash drawer:
Empty the ash drawer every week or when required.
It is therefore recommended to remove the ash in the
combustion chamber at least once a week using a suitable
suction device.
Make sure that the ash is completely cold before emptying it into a suitable container.
MOntHLy
cleaning the heat exchanger: the heat exchangers
chamber must be cleaned every month as the soot
deposited on the rear of the cast iron hearth wall blocks the
regular flow of fumes. When cleaning has been completed,
re-position the extractable cast iron with the opposite
movement used to remove it. Turn the lockbolt to return it
to its original position.
engLiSH
53