Time/Day Setting Screen; Program Setting Screen - Mitsubishi Electric PAC-YT34STA Libro De Instrucciones

4-3. TIME/DAY SETTING screen

• The current time and day are set and changed on this screen.
• A time notification can be issued. (A time notification is issued to collectively set the current time
of system controllers and remote controllers having a clock function.)
(1) Open the TIME/DAY SETTING screen.
Press the CLOCK
(2) Set the time.
1. The clock will advance by one minute when the CLOCK
held down, the time will advance in one-minute increments, ten-minute increments and one-hour
increments.
2. The clock will return by one minute when the CLOCK
held down, the time will return in one-minute increments, ten-minute increments and one-hour increments.
(3) Set the day.
The day displayed in the day display section will flicker in the order of Sunday, Monday,
Tuesday ... Saturday, Sunday each time the DAY
(4) Set the time notification.
The display at the time notification setting and display section will change as shown below each
time the switch is pressed.
MODE
No display
* Set this to "ON" when a time notification is to be issued.
(5) The set clock, day and time notification can be cleared to the previous values by pressing the
switch.
CLEAR
(6) The set time, day and time notification settings will be input when the
pressed. (The seconds unit will be set to 0 seconds.)
If the time notification is enabled, the time input with this operation will be notified.
NOTE 1. To cancel the setting, carry out step (1) to return to the Normal screen. The changes made to the time
setting will be cancelled.
2. The Program Setting screen and Weekly Program Setting screen cannot be opened if the time and
day are not set.

4-4. PROGRAM SETTING screen

• The details of the schedule operation are set and changed.
12
The set day flickers.
and switches simultaneously on the Normal screen.
ON
The pattern No. will flicker.
The time notification setting lights up.
The time flickers.
The time and day settings light up.
switch is pressed once. When the switch is
switch is pressed once. When the switch is
switch is pressed.
ON/OFF
The operation details are displayed.
The operation time is displayed.
The operation No. will flicker.
switch is