Kenmore 790.3667 Serie Manual De Uso Y Cuidado página 24

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Genera
Care & C eaning
(cont'd)
Hinge
support
ngeleverhook
Care
and C_eaning
of Stainless
Stee_ (Stainless Steel models only)
Some models are equipped with stainless steel exterior parts. Special care and
cleaning are required for maintaining the appearance of stainless parts. Please
refer to the table provided at the beginning of the General Care & Cleaning
section in this Use & Care Guide.
Lock engaged for door removal
Figure 1
HINGE SLOT- Door removed
from the oven
Figure 2
Hinge lever
Removing
and
Replacing
the
Oven
Door
The door is heavy, For safe, temporary storage, Uaythe door fiat
with the inside of the door facing down,
To Remove Oven Door:
1. Open the door to the fully opened position.
2. Pull up the lock located on both hinge supports and engage it in the hinge
lever hooks (Figure 1 ).You may have to apply a little downward pressure on
the door to pull the locks fully over the hinge lever hooks.
3. Grab the door by the sides and pull the bottom of the door up and toward you
to disengage the hinge supports. Keep pulling the bottom of the door toward
you while rotating the top of the door toward the range to completely disen-
gage the hinge levers (Figure 2).
4. To clean oven door, follow the instructions provided in the General Care &
Cleaning table.
To Reptace Oven Door:
1. Grab the door by the sides; place the hinge supports in the hinge slots.
Open the door to the fully opened position.
2. Disengage the lock from the hinge lever hooks on both sides (Figure 3).
Note: Make sure the hinge supports are fully engaged before unlocking the
hinge levers.
3. Close the oven door.
Special Door Care instructions - Most oven doors contain glass that can
break.
Read the following recommendations:
1.
Do not close the oven door until all the oven racks are fully in place.
2.
Do not hit the glass with pots, pans, or any other object.
3.
Scratching, hitting, jarring or stressing the glass may weaken its structure
causing an increased risk of breakage at a later time.
24

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido