Grounding Instructions; Conversion To Mquified Petroleum Gas (Or L - Kenmore 790.3667 Serie Manual De Uso Y Cuidado

Grounding instructions
For personal safety, the cooktop must be propedy grounded, For maximum
safety, the power cord must be plugged into an ebctrbal outbt that is
correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension cord.
if a 2-prong wall receptacle is the only available outlet, it is the personal
responsibility of the consumer to have it replaced with a properly g rounded
3-prong wall receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this cooktop for
complete installation and grounding instructions.
Grounding type Do not, under any "
wall receptacle
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3°prong grounding plug
This appliance is equipped with a 3-prong grounding _ Avoid fire hazard or electrical shock.
plug for your protection against shock hazard and should be plugged DO NOT use an adapter plug, an extension cord, or
directlyintoaproperlygrounded receptacle. DONOTcutorremovethe remove grounding prong from electrical power cord.
grounding prong from this plug. Failu re to follow this warning can cause serious injury,
fire or death.
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas range is designed to allow for conversion
to Liquefied Petroleum (L.P.) Gas.
Only a qualified service agent should perform the L.P.
conversion, if L.P. conversion is needed, contact 1-800-4-
MY-HOME@ for assistance. The L.P. Conversion Kit is
provided with this range and is located on the right panel
(right side) of the range. Before installing the kit be sure to
follow the L.P. Installation instructions carefully.
or electrician.
Any additions, changes or conversions
required in order for this appliance to satisfactorily meet the
application needs must be made by Sears Service Center.