Philips NORELCO S7000 Serie Manual De Instrucciones página 26

26
English
1
3
2
3 Place the shaver in the holder, tilt the
shaver backwards and press down the
SmartClean system cap to connect the
shaver ('click').
The battery symbol on the SmartClean
system starts to flash, which indicates that
the shaver is charging.
4 Press the on/off button on the SmartClean
system to start the cleaning program.
During the cleaning phase, the cleaning
symbol flashes. When the cleaning phase is
done (after approx. 10 minutes), the
cleaning symbol lights up continuously.
Next, the ready symbol lights up
continuously.
30 minutes after the cleaning program and
charging are done, the SmartClean system
switches off automatically.
The battery symbol lights up continuously
to indicate that the shaver is fully charged.
Charging takes approx. 1 hour.
5 To let the shaver dry, you can leave it in the
SmartClean system until your next shave.
You can also remove the shaver from the
SmartClean system, shake off excess fluid,
open the shaving unit and let the shaver
air-dry. Press to open the SmartClean cap,
to remove the shaver from the holder
('click').
Note: Note: If you press the on/off button of
the SmartClean system during the cleaning