Philips NORELCO S7000 Serie Manual De Instrucciones página 27

program, the program stops. In this case, the
cleaning or drying symbol goes out.
Note: Note: If you disconnect the SmartClean
system from its power supply, the cleaning
program stops.
Replacing the SmartClean cartridge
Replace the cleaning cartridge when the
replacement symbol flashes orange or when
you are no longer satisfied with the cleaning
result. If you clean the shaver with the
SmartClean system once a week, the cartridge
lasts approximately three months.
1 While holding the SmartClean system with
2
1
2 Remove the cleaning cartridge from the
3 Discard the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull
5 Place the cleaning cartridge in the
one hand, press the button on the side and
lift the top part of the SmartClean system.
SmartClean system and pour out any
remaining cleaning fluid. You can safely
pour the cleaning fluid down the sink.
off the seal.
SmartClean system.
27
English