Ivoclar Vivadent bluephase 20i Instrucciones De Uso página 5

TURBO Program
Consistently high light intensity for the poly-
merization of restorative and cementation
materials for direct and indirect restorations.
2.000 mW/cm 2
0 t [s]
HIGH POWER Program
Consistently high light intensity for the poly-
merization of restorative and cementation
materials for direct and indirect restorations.
1.200 mW/cm 2
0 t [s]
LOW POWER Program
Reduced light intensity with reduced heat
development for the polymerization of
adhesives, liners, and restorative materials
in areas near the pulp when restoring
Class V cavities.
650 mW/cm 2
0 t [s]
SOFT START Program
Step-by-step increase of the light intensity
with reduced shrinkage stress and reduced
heat development for the polymerization of
restorative materials.
1.200 mW/cm 2
650 mW/cm 2
0 5 t [s]
1) Applies to a maximum layer thickness of 2 mm and provided that the Instructions for Use of the respective material do not state any other recommendation (might be the case with dentin shades)
2) Applies to a maximum layer thickness of 3 mm
5
3) Applies to light-curing (exclusive use of base paste)
Light intensity
Max. exposure time for composites
Max. exposure time for Tetric EvoCeram
Filling materials
Composite
Tetric EvoCeram / Tetric EvoFlow
Artemis / 4 Seasons, InTen-S,
Tetric new, Tetric N-Ceram / Tetric N-Flow
Heliomolar / Heliomolar HB / Heliomolar Flow
Others 1)
Compomer 2)
Compoglass F / Compoglass Flow
Indirect restorations /
Luting materials
Variolink II 3) , Variolink Veneer 3)
Variolink Ultra 4) , Multilink Automix 4) ,
Dual Cement 4)
Miscellaneous
Heliosit Orthodontic
Filling materials
Composite
Tetric EvoCeram / Tetric EvoFlow
Artemis / 4 Seasons, InTen-S,
Tetric new, Tetric N-Ceram / Tetric N-Flow
Heliomolar / Heliomolar HB / Heliomolar Flow
Others 1)
Compomer 2)
Compoglass F / Compoglass Flow
Indirect restorations /
Luting materials
Variolink II 3) , Variolink Veneer 3)
Variolink Ultra 4) , Multilink Automix 4) ,
Dual Cement 4)
Miscellaneous
Helioseal / Helioseal F / Helioseal Clear
Monopaque
MultiCore Flow / Multicore HB
CoroSeal
CoroSeal Bonding
Vivaglass Liner
Adhesive
AdheSE , AdheSE One,
ExciTE, ExciTE DSC
Tetric N-Bond
Syntac / Heliobond
Temporary materials
Systemp.link
Systemp.inlay/onlay
Fermit / Fermit N
Miscellaneous
Heliosit Orthodontic
Filling materials
Composite
Tetric EvoCeram / Tetric EvoFlow
Artemis / 4 Seasons, InTen-S,
Tetric new, Tetric N-Ceram / Tetric N-Flow
Heliomolar / Heliomolar HB / Heliomolar Flow
Others 1)
Compomer 2)
Compoglass F / Compoglass Flow
4) Applies to dual-curing
®
bluephase 20i
2,000 – 2,200 mw/cm 2
10 sec.
5 sec.
Curing time
5 sec.
2x 5 sec.
2x 5 sec.
per mm ceramic: 2x 5 sec. per segment
2x 5 sec. per segment
2x 5 sec.
10 sec.
15 sec.
20 sec.
per mm ceramic: 10 sec. per segment
10 sec. per segment
10 sec.
20 sec.
20 sec.
10 sec.
10 sec.
20 sec.
10 sec.
10 sec.
10 sec.
10 sec.
20 sec.
15 sec.
20 sec.
20 sec.