Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to use Relative value mode
REL mode is available for all measuring functions, except frequency and working
cycle. i.e. if the stored value is 20 V and the current value is 22 V, the fi nal value
must be 2 V.
If a new measuring value is equal to stored value, 0.0 V will be displayed in the
screen.
To enter or leave REL mode:
- Use the selector switch to set the desired function. If you change the selector
after a selection, the meter will leave the REL mode.
- Press to enter REL mode, the autorange
will shut off, except on capacitance mode
and the current range close and display "0"
as stored value.
- Press again or move the selector switch
to reestablish stored value and leave REL
mode.
Press HOLD in REL mode to stop the measuring update.
Press HOLD to leave this mode
15
15
Publicidad
Tabla de contenido
