Briteq Beam Wizard 5x5 Manual De Instrucciones página 10

ENGLISH
 Once you have the desired curve, press the [ENTER] button to save it.
[FLOW Invert]
Used to change the running direction of the chases.
 Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
 Press the [ENTER] button: the values can be changed
 Use ▲/▼ buttons to toggle between ON and OFF.
 Press the [ENTER] button to confirm.
[MATRIX Rot.]
Used to select the position of LED Matrix compared to the base of the unit.
 Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
 Press the [ENTER] button to start editing.
 Use the ▼/▲ buttons to select one of the available installation positions:
[Standard] - [90°] - [180°] - [-90° (270°)]
 Once the right mode is shown on the display, press the [ENTER] button to confirm.
[SOUND Mode]
Used to adjust some of the settings for the LED Matrix while used in sound mode.
 Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
 Press the [ENTER] button.
 Press ◄/► buttons to select one of the options:
 [MIC Sense]: adapt the microphone sensitivity for the LED Matrix.
 Press the [ENTER] button.
 Use ▲/▼ buttons to change the value (000 – 099)
 Press the [ENTER] button.
 [Repeat]: adapt how many times a chase is played on the LED Matrix before the next one is shown.
 Press the [ENTER] button.
 Use ▲/▼ buttons to change the value (000 – 099)
 Press the [ENTER] button.
 [DMX/SOUND]: select if the LED Matrix is controlled by DMX or by audio while working in standalone.
 Press the [ENTER] button.
 Use ▲/▼ buttons to select:
 DMX: the chases on the LED Matrix are selected from the internal library using DMX-control.
 SOUND: the chases on the LED Matrix are running in full automatic audio mode.
 Press the [ENTER] button.
BRITEQ
®
8/107 BEAM WIZARD5x5-RGBW
OPERATION MANUAL