Calibration Menu - Briteq Beam Wizard 5x5 Manual De Instrucciones

ENGLISH

CALIBRATION MENU

This is a hidden menu where you can fine-tune the offset of several functions. To access this menu do as
follows: press the [ENTER] button for about 3seconds while you are in the SETUP menu (any option, not
important). Now the calibration menu shows up:
[Reset JOB]
Used to reset the [Last JOB] timer.
 Press the ◄/► buttons until the desired function is showing on
the display.
 Press the [ENTER] button: the values can be changed
 Use ▲/▼ buttons to toggle between NO and YES.
 Press the [ENTER] button to confirm.
[SET WHITE B] (set white balance)
Used to adjust the white balance or to perfectly match the colors of several projectors.
 Press the ◄/► buttons until the desired function is showing on the display.
 Press the [ENTER] button: the display shows [LED 001]
 Use the ▲/▼ buttons to select the number of the LED (001 → 025) that you want to adjust.
 Press the [ENTER] button to confirm: the display shows the 4 colors whith their current value:
Remark: (xxx is the current value of the selected color: [R](red), [G](green), [B](blue), [W](white)
 Press the ◄/► buttons to select the desired color.
 Use the ▲/▼ buttons to change the values of the selected color (from 050 to 255).
 Press the [ENTER] button to confirm.
 Use the ▲/▼ buttons to select the number of the next LED (001 → 025) that you want to adjust.
 ... repeat the actions until the white balance of all pixels is set.
Important notes:
 The setting of this option affects all color settings, static colors and DMX-controlled colors.
 It is highly recommended to save the new white balance settings to [USER Def.] (USER default
settings memory) to preserve the settings.
[Set PAN]
Used to adjust the home position of the PAN movement.
 Press the ◄/► buttons until the desired function is showing on the display.
 Press the [ENTER] button: the values can be changed
 Use ▲/▼ buttons to adjust the home position of the PAN movement: -127 to +128
 Press the [ENTER] button to confirm.
[Set TILT]
Used to adjust the home position of the TILT movement.
 Press the ◄/► buttons until the desired function is showing on the display.
 Press the [ENTER] button: the values can be changed
 Use ▲/▼ buttons to adjust the home position of the TILT movement: -127 to +128
 Press the [ENTER] button to confirm.
BRITEQ
®
[R] [G] [B] [W]
xxx xxx xxx xxx
13/107
OPERATION MANUAL
BEAM WIZARD5x5-RGBW