Removing The Brushroll - Simplicity S65 Manual Del Usuario

MAINTENANCE AND CARE

Removing the Brushroll

NOTE: Always turn off the vacuum and
remove the battery before performing
any service.
1. Remove the floor nozzle from the wand.
Turn the floor nozzle over (Fig. 1).
2. Use a coin or screwdriver to turn the
screw counter-clockwise (Fig. 2). Then
lift off the brushroll cover.
3. Remove the brushroll to clean.
4. Replace the brushroll then replace the
brushroll cover. Tighten the screw by
turning once clockwise.
5. Re-attach the floor nozzle to the wand
and continue to vacuum.
12
Fig. 1
Fig. 2