Time/Date Setup; Password Setup; Buzzer Setup - Lorex L15LD420 Serie Manual De Instrucciones

Configuration

TIME/DATE SETUP

Please set up the system date and time before the DVR
starts recording. The date and time can be adjusted by
Mouse wheel.
DATE FORMAT- Asia/American/European.
HOUR FORMAT- 12 hours/24 hours.
MONTH FORMAT- English/Numeric
1. We strongly suggest completing the following settings at the initial setup.
(1) Set up the DATE/TIME, and RUN all factory defaults.
(2) Format HDD (setup MENU - > HDD MANAGEMENT -> FORMAT )
2. DO NOT change the date and time after the recording starts. It may corrupt the DVR data archive and causes
playback error. If change date and time is required after the recording starts, please format HDD to avoid error.

PASSWORD SETUP

The password consists of 1 to 8 digits. Click 0~9 icon to
enter the password. Then, click ENTER to confirm and
enter the system.
[USER ID]
Display User ID.
[USER PW]
Enter the current password.
[NEW PW]
Enter the new password.
[CONFIRM]
Enter the new password again for confirmation.

BUZZER SETUP

[KEY TONE]
Turn on/off the buzzer for any key press on the Front pan-
el, remote control or Mouse Menu.
[VIDEO LOSS]
Turn on/off the buzzer when a video loss warning occurs.
[ALARM ACTIVE]
Turn on/off the buzzer when alarm is triggered.
[MOTION DETECT]
Turn on/off the beeping when motion is detected.
[DURATION]
Set the buzzer duration to Continuous, or between
10~590 Seconds.
36