OPTIONAL: Replacing the Hard Drive in the Hard Drive Bay
Note: The following refers to an optional hard drive replacement only on select models.
The compartment located on the side panel of the DVR is the removable Cartridge Casing in
which you insert the Hard Drive. The various parts of the Cartridge Casing are labeled for your
reference.
STEP 1: Remove the Cartridge Casing from the DVR.
unlock the cabinet.
STEP 2: Remove the Cover from the Cartridge Casing
• Un-clip the release latch with the word "OPEN" printed beside it by gently pushing on the latch.
• Slide the cover off to where it locks or catches the stopper and lift the Cartridge Casing to
remove it.
Release Latch
STEP 3: Slide the SATA Hard Drive into the Cartridge Casing
• Slide the SATA HDD into the Cartridge Casing with the SATA HDD connectors facing the
rear of the Cartridge Casing.
• Lift the handle and the door should open.
• If the door does not open you may need to unlock
the cabinet. Please refer to Step 7on how to
Slide Cover Off
Connecting PTZ Cameras - Appendix #5
53