Relay Mode - Brightwell Brightstar II Manual De Instrucciones

P
ROGRAMMING
Access the program mode by entering the four-digit security
code (see page 24).
Assign the pumps to the required manifolds (see page 25).
FWD/ACCEPT
Press the
screen.
Set the Flush Valve Mode and Flush Time - if required (see
pages 25 & 26).
FWD/ACCEPT
Press the
screen.
The BrightStar software allows the user to program each pump
with a Flowrate instead of a pump speed.
This is so the counters will display a TOTAL DOSAGE rather
than a TOTAL RUN TIME.
Flowrate:
Measure and set both
the date (see page 27 ).
FWD/ACCEPT
Press the
TOTAL RUN TIME screen for that pump.
Pump Speed:
(Not available on BSHL units)
Set the speed required for the displayed pump (see page 26).
FWD/ACCEPT
Press the
RUN TIME screen for that pump.
At the TOTAL RUN TIME screen, press the
keys to toggle between the TOTAL RUN TIME (or CHEMICAL
DOSAGE if a flow rate has been set), and TOTAL CYCLES.
These counters can be "zeroed" by simultaneously holding
UP DOWN
down the and
FWD/ACCEPT
Press the
settings for the next pump.
Set the speeds for the remaining pumps in the same way as
above.
When all of the pumps have been programmed, the SAVE
SETTINGS? prompt will appear.
FWD/ACCEPT
Press the
the unit to service.
Alternatively:
If the settings are not as you want, use the
trace your steps and amend any settings you wish to change.
B L S
RIGHTSTAR AUNDRY YSTEMS
-
R
ELAY
key to confirm and move to the next
key to confirm and move to the next
the flowrate for the displayed pump, and
key to confirm and move onto the
key to confirm and move onto the
keys.
key to confirm and move on to the
key to confirm the settings and return
M
ODE
MAN 1:----------
MAN 2:----------
MAN 3:----------
OFF P:1234567890
UP DOWN
and
BACK
key to re-
38
BSL10

RELAY MODE

FLUSH VALVE
TIME
00MINS 00SECS
PUMP1
SPEED
080%
PUMP1
TOTAL RUN TIME
00MINS 00SECS
PUMP2
SPEED
080%
PUMP2
TOTAL RUN TIME
00MINS 00SECS
PUMP10
SPEED
080%
PUMP10
TOTAL RUN TIME
00MINS 00SECS
SAVE SETTINGS?
E
NGLISH
PUMP1
FLOWRATE: 0000ml
DATE: 01/01/01
PUMP1
TOTAL CYCLES
00000
PUMP2
FLOWRATE: 0000ml
DATE: 01/01/01
PUMP2
TOTAL CYCLES
00000
PUMP10
FLOWRATE: 0000ml
DATE: 01/01/01
PUMP10
TOTAL CYCLES
00000
SETTINGS SAVED
B L S
RIGHTSTAR AUNDRY YSTEMS